Alimentos à base de plantas : uma abordagem metabolômica para avaliar a composição e o impacto de tecnologias de processamento
Visualizar/abrir
Data
2026Orientador
Co-orientador
Nível acadêmico
Doutorado
Tipo
Assunto
Resumo
Alimentos à base de plantas têm ganhado destaque como alternativas sustentáveis aos produtos tradicionais, impulsionados por fatores sociais, éticos e ambientais. Dentre esses produtos, destacam-se os análogos cárneos e as bebidas vegetais, cujos atributos de qualidade dependem fortemente da formulação e das condições de processamento. A compreensão das transformações químicas associadas às diferentes matrizes proteicas e às tecnologias de preparo torna-se, portanto, essencial para o desenvolvi ...
Alimentos à base de plantas têm ganhado destaque como alternativas sustentáveis aos produtos tradicionais, impulsionados por fatores sociais, éticos e ambientais. Dentre esses produtos, destacam-se os análogos cárneos e as bebidas vegetais, cujos atributos de qualidade dependem fortemente da formulação e das condições de processamento. A compreensão das transformações químicas associadas às diferentes matrizes proteicas e às tecnologias de preparo torna-se, portanto, essencial para o desenvolvimento de produtos com propriedades sensoriais e nutricionais adequadas. Nesse contexto, o objetivo do presente trabalho foi avaliar os efeitos da formulação e do processamento nas propriedades físico-químicas e no perfil metabolômico de alimentos à base de plantas. Para isso, foram conduzidos quatro estudos complementares. O primeiro estudo caracterizou a diversidade química de hambúrgueres plant-based comercializados no mercado brasileiro, revelando elevada heterogeneidade e a presença de múltiplas classes de metabólitos, como compostos fenólicos, lipídios, ácidos orgânicos e aminoácidos. As análises multivariadas indicaram que a fonte proteica contribui para padrões químicos globais; contudo, o grau de processamento das proteínas e a seleção de ingredientes exercem papel determinante na composição química de produtos de uma mesma matriz, com formulações menos processadas apresentando maiores abundâncias relativas de compostos fenólicos característicos. O segundo estudo investigou a relação entre composição química e comportamento físico-químico durante a cocção, por meio da comparação entre hambúrgueres à base de plantas (PB) e de origem animal (MB) submetidos a diferentes tecnologias, incluindo air fryer, grill, forno e micro-ondas. Os métodos de preparo influenciaram parâmetros como perda de massa, umidade, textura e cor, com efeitos mais pronunciados no micro-ondas. Entretanto, as principais diferenças foram atribuídas ao tipo de hambúrguer, refletindo distinções intrínsecas entre as matrizes vegetal e animal. No terceiro estudo, avaliou-se de forma mais aprofundada o impacto das tecnologias de cocção sobre o metaboloma dos hambúrgueres PB. As análises evidenciaram transformações químicas relevantes após o cozimento, incluindo a degradação de compostos termolábeis, como lipídios e flavonoides, bem como o aumento relativo de alguns compostos fenólicos. Entre os métodos avaliados, o grill promoveu as alterações mais expressivas, enquanto o micro-ondas apresentou menor impacto, preservando melhor lipídios e fenólicos específicos. Por fim, o quarto estudo ampliou o escopo do trabalho para bebidas vegetais e tecnologias inovadoras de processamento, avaliando os efeitos do tratamento térmico brando (TC40), da pasteurização convencional (TC72), do processamento por alta pressão (HPP) e da tecnologia de ultra-cisalhamento (UST) na composição química de uma bebida à base de amêndoas. As diferentes tecnologias induziram perfis químicos distintos, refletindo o balanço entre degradação e liberação de metabólitos. Enquanto a pasteurização convencional preservou, em maior medida, a composição da matriz in natura, o tratamento térmico brando promoveu maior degradação de compostos fenólicos e lipídios. Por outro lado, o HPP e a UST favoreceram a extração de alguns flavonoides, embora também tenham promovido a degradação de metabólitos mais sensíveis. Essas observações destacam o potencial de tecnologias inovadoras para modular de forma direcionada a composição química de bebidas vegetais. De forma integrada, os estudos realizados evidenciam a complexidade dos alimentos à base de plantas e a importância da formulação e do processamento na definição de suas características físico-químicas. Ademais, os resultados oferecem uma base científica para a avaliação e o aprimoramento de análogos cárneos e bebidas vegetais, contribuindo para o desenvolvimento de alimentos alinhados às expectativas dos consumidores e às demandas de um mercado em constante expansão. ...
Abstract
This study reported a fundamental comparison of two synthesis methods to obtain nanostructured TiO2 in the antibacterial and photodegradable properties of PP/TiO2 films. The nanostructured TiO2 was obtained by 1) the traditional sol-gel method and by 2) in situ synthesis in a PP/xylene solution. The films were produced by casting. The TiO2 obtained by in situ synthesis showed a nanometric structure (7.7 nm), high surface area (159.8 m².g-1) and high crystallinity (even without thermal treatment ...
This study reported a fundamental comparison of two synthesis methods to obtain nanostructured TiO2 in the antibacterial and photodegradable properties of PP/TiO2 films. The nanostructured TiO2 was obtained by 1) the traditional sol-gel method and by 2) in situ synthesis in a PP/xylene solution. The films were produced by casting. The TiO2 obtained by in situ synthesis showed a nanometric structure (7.7 nm), high surface area (159.8 m².g-1) and high crystallinity (even without thermal treatment), presenting a mixture of anatase and rutile phases. These phases together have a synergistic effect that is beneficial in the antibacterial and photocatalytic properties of TiO2 particles. These characteristics were fundamental to the antibacterial action, with almost total reduction of the population of both Gram-positive and Gram-negative bacteria. Also, degradation of 20 % of the PP was observed under UV with the addition of the particles obtained by in situ route. The in situ method proved to be the simplest way to obtain PP/TiO2 films in a single step with antibacterial and photodegradable action for possible use in active packaging. Plant-based foods have emerged as sustainable alternatives to conventional products, driven by social, ethical, and environmental factors. Among these products, meat analogues and plantbased beverages stand out, with quality attributes that are strongly influenced by formulation and processing conditions. Understanding the chemical transformations associated with different protein matrices and processing technologies is therefore essential for developing products with appropriate sensory and nutritional properties. In this context, the aim of the present work was to evaluate the effects of formulation and processing strategies on the physicochemical properties and metabolomic profile of plant-based foods. To this end, four complementary studies were conducted. The first study characterized the chemical diversity of plant-based burgers commercially available on the Brazilian market, revealing high heterogeneity and the presence of multiple classes of metabolites, such as phenolic compounds, lipids, organic acids, and amino acids. Multivariate analyses indicated that protein source contributes to global chemical patterns; however, processing degree and ingredient selection play a dominant role in shaping the chemical composition of products within the same matrix, with higher relative abundances of specific phenolic compounds observed in less processed formulations. The second study investigated the relationship between chemical composition and physicochemical behavior during cooking by comparing plant-based (PB) and meat-based (MB) burgers prepared using different methods, including air frying, oven baking, grilling, and microwaving. Cooking methods significantly affected parameters such as cooking loss, moisture content, texture, and color, with more pronounced effects observed in microwaveprepared samples. Nevertheless, the main differences were attributed to burger type, reflecting intrinsic distinctions between plant and animal matrices. In the third study, the impact of cooking technologies on the metabolome of PB burgers was examined in greater depth. The analyses revealed relevant chemical transformations after cooking, including the degradation of thermolabile compounds, such as lipids and flavonoids, as well as a relative increase in certain phenolic compounds. Among the evaluated methods, grilling induced the most pronounced metabolic alterations relative to raw samples, whereas microwave cooking had the least impact, better preserving specific lipids and phenolic compounds. Finally, the fourth study expanded the scope to plant-based beverages and innovative processing technologies, evaluating the effects of mild thermal treatment (TC40), short-time pasteurization (TC72), high-pressure processing (HPP), and ultra-shear technology (UST) on the chemical composition of an almond-based beverage. The different technologies induced distinct chemical profiles, reflecting a balance between metabolite degradation and release. TC72 largely preserved the native matrix composition, whereas TC40 resulted in greater degradation of phenolic compounds and lipids. By contrast, HPP and UST favored the extraction of specific flavonoids, although degradation was also observed for more susceptible compounds. These observations highlight the potential of innovative technologies to selectively modulate the chemical composition of plant-based beverages. Taken together, these studies demonstrate the complexity of plant-based foods and the role of formulation and processing in shaping their physicochemical properties. Moreover, these findings provide a scientific basis for evaluating and improving meat analogues and plant-based beverages, supporting the development of products that meet consumer expectations and the demands of a rapidly expanding market. ...
Instituição
Universidade Federal do Rio Grande do Sul. Escola de Engenharia. Programa de Pós-Graduação em Engenharia Química.
Coleções
-
Engenharias (7923)Engenharia Química (550)
Este item está licenciado na Creative Commons License


