Avaliação de revestimentos para proteção contra a descarbonetação de tijolos refratários MgO-C durante o aquecimento de panelas de aciaria
dc.contributor.author | Lima, Álvaro Niedersberg Correia | pt_BR |
dc.contributor.author | Trommer, Rafael Mello | pt_BR |
dc.contributor.author | Zimmer, Andre | pt_BR |
dc.contributor.author | Vicenzi, Juliane | pt_BR |
dc.contributor.author | Braganca, Saulo Roca | pt_BR |
dc.contributor.author | Boschetti, J. | pt_BR |
dc.contributor.author | Bergmann, Carlos Perez | pt_BR |
dc.date.accessioned | 2010-04-16T09:17:01Z | pt_BR |
dc.date.issued | 2008 | pt_BR |
dc.identifier.issn | 1517-7076 | pt_BR |
dc.identifier.uri | http://hdl.handle.net/10183/20875 | pt_BR |
dc.description.abstract | Este trabalho tem como objetivo avaliar a proteção contra a descarbonetação de diferentes revestimentos de pintura de tijolos refratários MgO-C usados em panelas de aciaria. A oxidação de tijolos refratários MgO-C leva à perda de espessura dos tijolos e, conseqüentemente, à diminuição da vida útil dos mesmos. Neste trabalho, foram testados três tipos de revestimentos (A, B e C), preparados em laboratório, os quais foram aplicadas sobre tijolos MgO-C. Estes revestimentos foram testados em relação à proteção contra a descarbonetação nas temperaturas de 850, 950 e 1050ºC. A partir dos resultados obtidos, verificou-se que a aplicação de revestimentos para pintura sobre refratários MgO-C apenas minimiza a descarbonetação, já que estes revestimentos vitrificam em temperaturas superiores ao início da oxidação. Além disso, notou-se que a espessura da camada descarbonetada é diretamente proporcional à temperatura de queima. Entre os revestimentos avaliados, o que apresentou melhores resultados foi o C, devido as suas características de escorrimento e viscosidade, além de vitrificar em temperatura inferior a dos revestimentos A e B. | pt_BR |
dc.description.abstract | This work aims to evaluate the utilization of different coatings to prevent the decarburization of refractory bricks MgO-C used in ladles. This oxidation causes the loss of thickness of the bricks and the reduction of its useful live. The three types of coatings A, B e C were prepared in laboratory and then were applied on MgO-C bricks. The samples were tested at temperatures of 850ºC, 950ºC and 1050ºC. It was verified that the three tested coatings only minimize the decarburization, since they vitrify and become effective at temperatures higher to the beginning of the oxidation temperature. Moreover, it was noticed that the thickness of the decarburized layer is directly proportional to the firing temperature. The coating that presented better results was C, which showed better characteristics of flowing and viscosity. Besides that, it vitrified at lower temperature comparing to coatings A and the B. | en |
dc.format.mimetype | application/pdf | |
dc.language.iso | por | pt_BR |
dc.relation.ispartof | Revista matéria. Rio de Janeiro. vol. 13, n. 3 (set. 2008), p. 488-494 | pt_BR |
dc.rights | Open Access | en |
dc.subject | Materiais refratários | pt_BR |
dc.subject | Decarburization | en |
dc.subject | MgO-C bricks | en |
dc.subject | Aciaria | pt_BR |
dc.subject | Tijolos | pt_BR |
dc.subject | Coatings | en |
dc.title | Avaliação de revestimentos para proteção contra a descarbonetação de tijolos refratários MgO-C durante o aquecimento de panelas de aciaria | pt_BR |
dc.title.alternative | Evaluation of coatings for protection against decarburization of refractory bricks MgO-C during heating in steelmaking ladles | en |
dc.type | Artigo de periódico | pt_BR |
dc.identifier.nrb | 000727197 | pt_BR |
dc.type.origin | Nacional | pt_BR |
Files in this item
This item is licensed under a Creative Commons License
-
Journal Articles (40021)Engineering (2426)