Mostrar registro simples

dc.contributor.authorFerreira, Roberto Luiz Rodriguezpt_BR
dc.contributor.authorSantana, Ruth Marlene Campomanespt_BR
dc.date.accessioned2015-04-11T02:01:13Zpt_BR
dc.date.issued2015pt_BR
dc.identifier.issn0104-1428pt_BR
dc.identifier.urihttp://hdl.handle.net/10183/115216pt_BR
dc.description.abstractO objetivo deste trabalho é avaliar a influência do tipo de poliolefina e da razão de sopro (RS) nas propriedades físicas e térmicas de filmes produzidos em processo de extrusão tubular. No processamento foram utilizados um polietileno de baixa densidade (PEBD) e um polietileno de alta densidade (PEAD) transformados numa linha de extrusão de filme tubular com três RS de 1,5:1; 2,5:1 e 3,5:1. Os resultados das caracterizações físicas dos filmes mostraram maior variação de espessura no perímetro dos filmes tubulares de PEAD, quando comparados aos de PEBD. O aumento da RS causou uma diminuição de amplitude desta variação nos filmes tubulares de PEBD e diferenças nas propriedades ópticas. O coeficiente de atrito (COF) dos filmes foi menor para o PEAD e não teve variação significativa com o aumento da RS utilizada. Em relação às propriedades mecânicas, os filmes de PEAD apresentaram maior resistência à tração e menores valores de deformação no ponto de escoamento em ambas as direções. As RS maiores apresentaram similaridade nas tensões e nas deformações entre as direções da máquina (DM) e transversal (DT). A RS ideal, constatada para os filmes processados com PEBD, é 2,5:1 e com PEAD, é 3,5:1. Os filmes de PEAD apresentaram opacidade maior e menor brilho, quando comparados aos filmes de PEBD. Os resultados comprovaram valores conhecidos na literatura, entretanto introduziu-se uma inovação neste estudo: a utilização da técnica termográfica digital portátil, que permite visualizar, de maneira instantânea (on-line), as variações de temperatura no perímetro do balão, na zona de névoa (região de cristalização ou solidificação do filme).pt_BR
dc.description.abstractThe purpose of this study is to evaluate the influence of the polyolefin type and the blow-up ratio (BUR) on the thermal physical properties of films produced in a blown film extrusion process. It was used low density polyethylene (LDPE) and high density polyethylene (HDPE) processed in a blown film extrusion line at three BUR of: 1.5:1; 2.5:1 and 3.5:1. The results of physical characterization on these films demonstrated that the increase in the BUR shows a higher thickness variation in the perimeter of tubular films and, therefore, optical properties variation. The coefficient of friction (COF) of the films was smaller for HDPE and did not have significant variation with the increase in the BUR applied. Regarding mechanical properties, HDPE films showed higher tensile strength and lower strain values in the yield point, in both directions. The largest BUR showed higher similarity of the tensions and strains between the machine direction (MD) and transverse direction (TD). The ideal BUR observed for films processed with LDPE is 2.5:1, for HDPE this number is higher and close to 3.5:1. The HDPE films showed more opacities and less brightness when compared to LDPE films. The results prove well known values in the literature, however, there was an innovation introduced in this study which is the use of the portable digital thermo graphic technique that allows the instantaneous visualization (on-line) of the temperature variation in the bubble perimeter in the frost line (crystallization or solidification area of the film).en
dc.format.mimetypeapplication/pdfpt_BR
dc.language.isoporpt_BR
dc.relation.ispartofPolímeros: ciência e tecnologia. São Carlos. Vol. 25, n. 1 (Jan./Feb. 2015), p. 83-93pt_BR
dc.rightsOpen Accessen
dc.subjectPolietileno de alta densidadept_BR
dc.subjectLDPEen
dc.subjectPolietileno de baixa densidadept_BR
dc.subjectHDPEen
dc.subjectExtrusãopt_BR
dc.subjectLLDPEen
dc.subjectBlow-up ratioen
dc.subjectFrost lineen
dc.subjectBlown filmen
dc.subjectThermographicen
dc.titleEstudo comparativo da influência da razão de sopro nas propriedades de filmes tubulares de PEBD e PEADpt_BR
dc.title.alternativeComparative study of the influence of blow-up ratio in the properties of HDPE and LDPE extruded blow films en
dc.typeArtigo de periódicopt_BR
dc.identifier.nrb000956160pt_BR
dc.type.originNacionalpt_BR


Thumbnail
   

Este item está licenciado na Creative Commons License

Mostrar registro simples