Mostrar registro simples

dc.contributor.advisorLindau, Luis Antoniopt_BR
dc.contributor.authorOliveira, Gilson Adamczukpt_BR
dc.date.accessioned2010-10-30T04:20:10Zpt_BR
dc.date.issued2010pt_BR
dc.identifier.urihttp://hdl.handle.net/10183/26535pt_BR
dc.description.abstractEste trabalho propõe um modelo de qualidade e produtividade para o préabate de frangos de corte, processo que fornece a matéria prima inicial aos abatedouros. Existe grande interface de responsabilidades nas operações do préabate. Além disso, estas operações ocorrem em etapas e locais que vão desde os aviários até a recepção dos abatedouros. Estes fatores tornam muito difícil o controle do processo de pré-abate e qualquer problema ou perda incidirá sobre todos os processos subsequentes. O modelo foi construído com base em uma ampla revisão sobre o assunto, um estudo de caso descritivo de uma empresa do ramo e através do auxílio de especialistas do meio produtivo e acadêmico. Consiste de quatro módulos: módulo 1-aviários, apanha e carregamento, módulo 2-transporte e módulo 3-espera e pendura. O quarto módulo aborda o controle do processo e melhorias. Dentre as proposições do modelo destacam-se: o dimensionamento das equipes de apanha, frota e do galpão de espera; treinamento das equipes de apanha; uma série de quadros e tabelas que permitem a programação de coleta dos aviários, com estratégia de gerenciamento de riscos do estresse térmico por calor das aves, utilizando um índice de conforto térmico; um método de estratificação para identificar onde e em que parte das aves ocorreram hematomas e fraturas; por fim propõe-se a utilização de cartas de controle de medidas individuais de Shewart para monitoramento do processo. A validação do modelo ocorreu em duas empresas de grande porte. A conformidade foi de 78,8% na primeira empresa e 87,6% na segunda, em 113 recomendações técnicas rotineiras propostas. O modelo indicou dimensionamento adequado de equipes de apanha e frota para a primeira empresa e superdimensionamento na segunda nestes dois itens. Os galpões de espera das duas empresas comportam mais caminhões do que o necessário para o fluxo atual de abate, indicando que podem suportar ampliação deste fluxo. O método de estratificação apresentou restrições quanto à aplicabilidade nas duas empresas. A utilização de cartas de controle foi bem aceita para monitorar o processo de préabate. Os resultados indicam bom potencial de transferibilidade do estudo desenvolvido para as empresas nacionais de frangos de corte.pt_BR
dc.description.abstractThis paper puts forward a model of quality and productivity for the pre-slaughter of broilers, the process that begins with the capture of the birds at the site where they have been bred and ends with their being humanely killed in the slaughterhouse and their carcasses used as the initial raw material. There is a huge interface of responsibilities in pre-slaughter operations. Moreover, these operations occur in stages and locations ranging from the poultry houses to the receipt of the birds in the slaughterhouses. These factors make it very difficult to control the pre-slaughter process and any problem or loss will have an impact on all subsequent processes. The model was built after a comprehensive review of the subject and is based on a descriptive case study in an agrobusiness. It benefited from the assistance of experts from the productive sector and the academic world. The model consists of four modules: Module 1-poultry houses, catching and crating; module-2- transportation; module 3-holding and hanging. The fourth module deals with control of the process and improvements. Among the propositions of the model, the following are emphasized: sizing the teams of catchers, the fleet and holding area; training the teams of catchers; a series of charts and tables that allow collection from the poultry houses to be scheduled, with a strategy for managing the risks of the birds suffering from thermal stress because of excess heat by using a thermal comfort index; a stratification method to identify at what point during the process and on what part of the bird bruises and fractures occur; and finally the use of Shewhart control charts for individual measurements so as to monitoring the process is proposed. Validation of the model took place in two large companies. Conformity was 78.8% in the first company and 87.6% in the second, in 113 routine technical recommendations proposed. The model indicated the sizing of teams of catchers and the fleet were appropriate for the first company and there was over-sizing in the second company with regard to these two items. The holding areas of the two companies hold more trucks than necessary for the current flow of slaughter, which indicates they can support expansion of this flow. The stratification method revealed restrictions as to its applicability in the two companies. The use of control charts was readily accepted so as to monitor the pre-slaughter process. The results indicate there is good potential for the study to be transferable to national broiler chicken companies.en
dc.format.mimetypeapplication/pdf
dc.language.isoporpt_BR
dc.rightsOpen Accessen
dc.subjectControle de qualidadept_BR
dc.subjectAgrobusinessen
dc.subjectIndústria frigoríficapt_BR
dc.subjectRefrigerated industryen
dc.subjectPre-slaughter of broiler chickensen
dc.subjectAgronegóciopt_BR
dc.subjectQuality and productivityen
dc.subjectProdutividadept_BR
dc.titleModelo de qualidade e produtividade das questões operacionais fase pré-abate de frangos de cortept_BR
dc.typeTesept_BR
dc.identifier.nrb000757930pt_BR
dc.degree.grantorUniversidade Federal do Rio Grande do Sulpt_BR
dc.degree.departmentEscola de Engenhariapt_BR
dc.degree.programPrograma de Pós-Graduação em Engenharia de Produçãopt_BR
dc.degree.localPorto Alegre, BR-RSpt_BR
dc.degree.date2010pt_BR
dc.degree.leveldoutoradopt_BR


Thumbnail
   

Este item está licenciado na Creative Commons License

Mostrar registro simples