Seleção de material para polias de elevador
dc.contributor.advisor | Ferreira, Ney Francisco | pt_BR |
dc.contributor.author | Cunha, Álvaro da Rosa | pt_BR |
dc.date.accessioned | 2015-10-16T02:42:12Z | pt_BR |
dc.date.issued | 2015 | pt_BR |
dc.identifier.uri | http://hdl.handle.net/10183/127744 | pt_BR |
dc.description.abstract | Polias são elementos importantes no funcionamento de um elevador e a escolha de um material que apresente baixa resistência ao desgaste para a sua manufatura gera a necessidade de substituição antecipada desses componentes. Este trabalho visa selecionar o melhor material, estudando sua taxa de desgaste quando atritado com esferas de aço, em ensaios de pino sobre disco seguindo a norma ASTM G-99. Os materiais escolhidos para o estudo foram ferro fundido nodular, com e sem tratamento superficial de oxidação negra, ferro fundido cinzento, com e sem tratamento superficial e Nylon 6. O Nylon foi o material que apresentou o melhor desempenho, seguido pelas amostras com oxidação negra, tendo o ferro fundido cinzento apresentando como pior resultado. | pt_BR |
dc.description.abstract | Pulleys are very important elements in the operation of an elevator and the choice of a material which has low wear resistance for their manufacture creates the need for early replacement of such components. This work aims to select the best material, studying its wear rate when rubbed with steel balls in pin on disk tests following the ASTM G-99. The materials chosen for the study were nodular grapghite cast iron, with and without surface treatment of black oxidation, flake gray cast iron, with and without surface treatment and Nylon 6. Nylon was the material that presented the best performance, followed by samples with black oxidation, and the flake graphite cast iron presented as worst result. | en |
dc.format.mimetype | application/pdf | |
dc.language.iso | por | pt_BR |
dc.rights | Open Access | en |
dc.subject | Engenharia mecânica | pt_BR |
dc.subject | Wear rate | en |
dc.subject | Pin on disk | en |
dc.subject | Material selection | en |
dc.subject | Pulley | en |
dc.title | Seleção de material para polias de elevador | pt_BR |
dc.title.alternative | Material selection for elevator pulley | en |
dc.type | Trabalho de conclusão de graduação | pt_BR |
dc.identifier.nrb | 000970652 | pt_BR |
dc.degree.grantor | Universidade Federal do Rio Grande do Sul | pt_BR |
dc.degree.department | Escola de Engenharia | pt_BR |
dc.degree.local | Porto Alegre, BR-RS | pt_BR |
dc.degree.date | 2015 | pt_BR |
dc.degree.graduation | Engenharia Mecânica | pt_BR |
dc.degree.level | graduação | pt_BR |
Files in this item
This item is licensed under a Creative Commons License