Show simple item record

dc.contributor.advisorStedile, Fernanda Chiarellopt_BR
dc.contributor.authorPitthan Filho, Eduardopt_BR
dc.date.accessioned2013-06-19T01:44:02Zpt_BR
dc.date.issued2013pt_BR
dc.identifier.urihttp://hdl.handle.net/10183/72590pt_BR
dc.description.abstractO carbeto de silício (SiC) é um semicondutor com propriedades adequadas para substituir o silício em dispositivos eletrônicos em aplicações que exijam alta potência, alta freqüência e/ou temperatura. Além disso, um filme de dióxido de silício (SiO2) pode ser crescido termicamente sobre o SiC de maneira análoga a sobre silício, permitindo que a tecnologia já existente para a fabricação de dispositivos utilizando Si possa ser adaptada para o caso do SiC. No entanto, filmes crescidos termicamente sobre SiC apresentam maior densidade de defeitos eletricamente ativos na região interfacial SiO2/SiC que no SiO2/Si. Assim, compreender a origem e os parâmetros que afetam essa degradação elétrica é um importante passo para a tecnologia do SiC. A primeira parte deste trabalho teve como objetivo compreender o efeito de parâmetros de oxidação (pressão de oxigênio e tempo de oxidação) no crescimento térmico de filmes de dióxido de silício sobre substratos de carbeto de silício. As oxidações foram realizadas em ambiente rico em 18O2 e a influência na taxa de crescimento térmico dos filmes de Si18O2 e nas espessuras das regiões interfaciais formadas entre o filme dielétrico e o substrato foram investigadas utilizando análises por reação nuclear. Para correlacionar as modificações nas propriedades investigadas com as propriedades elétricas das amostras, estruturas metal-óxidosemicondutor foram fabricadas e levantamento de curvas corrente-voltagem e capacitânciavoltagem foi realizado. Com isso, pretendeu-se melhor compreender a origem da degradação elétrica gerada pela oxidação térmica no SiC. Observou-se que a taxa de crescimento térmico dos filmes de SiO2 depende de um parâmetro dado pelo produto do tempo de oxidação e da pressão de oxigênio, para as condições testadas. O deslocamento da tensão de banda plana com relação ao valor ideal mostrou-se igualmente dependente desse parâmetro, indicando que uma maior degradação elétrica na região interfacial SiO2/SiC ocorrerá conforme o filme fica mais espesso devido ao aumento dos parâmetros investigados. Não observaram-se modificações nas espessuras da região interfacial SiO2/SiC e na tensão de ruptura dielétrica dos filmes de SiO2 atribuídas aos parâmetros de oxidação testados. Na segunda parte deste trabalho, visando minimizar a degradação elétrica da região interfacial SiO2/SiC gerada pela oxidação térmica do SiC, propôs-se crescer termicamente, em uma condição mínima de oxidação, um filme muito fino e estequiométrico de SiO2, monitorado por espectroscopia de fotoelétrons induzidos por raios X. Para formar filmes mais espessos de SiO2 e poder fabricar estruturas MOS, depositaram-se filmes de SiO2 por sputtering. As espessuras e estequiometria dos filmes depositados foram determinadas por espectrometria de retroespalhamento Rutherford com ou sem canalização. As estruturas MOS em que o filme fino de SiO2 foi crescido termicamente antes da deposição apresentaram menor deslocamento da tensão de banda plana com relação ao valor ideal e maior tensão de ruptura dielétrica do que as amostras em que o filme foi apenas crescido termicamente ou apenas depositado, confirmando a minimização da degradação elétrica da região interfacial SiO2/SiC pela rota proposta. O efeito de um tratamento térmico em ambiente inerte de Ar nas estruturas também foi investigado. Observou-se uma degradação elétrica na região interfacial SiO2/SiC devido a esse tratamento. Análises por reação nuclear indicaram que o filme fino crescido termicamente não permaneceu estável durante o tratamento térmico, perdendo oxigênio para o ambiente gasoso e misturando os isótopos de oxigênio do filme crescido termicamente com o do filme depositado.pt_BR
dc.description.abstractSilicon carbide (SiC) is a semiconductor with adequate properties to substitute silicon in electronic devices in applications that requires high power, high frequency, and/or high temperature. Besides, a silicon dioxide (SiO2) film can be thermally grown on SiC in a similar way to that on Si, allowing that technology already used to fabricate devices based on Si to be adapted to the SiC case. However, the oxide films thermally grown on SiC present higher density of electrical defects at the SiO2/SiC interfacial region when compared to the SiO2/Si. Thus, the understanding of the origin and what parameters affect the electrical degradation is an important step to the SiC technology. The first part of this work aimed to understand the effect of oxidation parameters (oxygen pressure and oxidation time) in the thermal growth of silicon dioxide films on silicon carbide substrates. The oxidations were performed in an 18O2 rich ambient and the influence on the growth rate of the Si18O2 films and on the interfacial region thickness formed between the dielectric film and the substrate were investigated using nuclear reaction analyses. To correlate the modifications observed in these properties with modifications in the electrical properties, metal-oxide-semiconductors structures were fabricated and current-voltage and capacitancevoltage curves were obtained. The aim was to understand the origin of the electrical degradation due to the thermal oxidation of silicon carbide. It was observed that the growth rate of the Si18O2 films depends on the parameter given by the product of the oxygen pressure and the oxidation time, under the conditions tested. The flatband voltage shift with respect to the ideal value was also influenced by the same parameter, indicating that a larger electrical degradation in the SiO2/SiC interfacial region will occur as the film becomes thicker due to the increase of the values of the investigated parameters. No modifications were observed in the SiO2/SiC interfacial region thickness and in the dielectric breakdown voltage of the SiO2 films that could be attributed to the oxidation parameters tested. In the second part of this work, in order to minimize electrical degradation due to thermal oxidation of silicon carbide, a stoichiometric SiO2 film with minimal thickness was thermally grown, monitored by X-ray photoelectron spectroscopy. To obtain thicker films and to fabricate MOS structures, a SiO2 film was deposited by sputtering. The thicknesses and stoichiometries of the deposited films were determined by Rutherford backscattering spectrometry using or not the channeling geometry. The MOS structures in which a thin film was thermally grown before the deposition presented smaller flatband voltage shift and higher breakdown voltage when compared to SiO2 films only thermally grown or only deposited directly on SiC, confirming that the electrical degradation in the SiO2/SiC interfacial region was minimized using the proposed route. The effect of one thermal treatment in argon in the structures was also investigated. An electrical degradation in the SiO2/4H-SiC interface was observed. Nuclear reaction analyses indicated that the thin film thermally grown was not stable during the annealing, loosing O to the gaseous ambient and mixing O isotopes of the thermally grown film with those of the deposited film.en
dc.format.mimetypeapplication/pdf
dc.language.isoporpt_BR
dc.rightsOpen Accessen
dc.subjectDióxido de silíciopt_BR
dc.subjectSilicon carbideen
dc.subjectCarbeto de silíciopt_BR
dc.subjectSilicon dioxideen
dc.subjectMospt_BR
dc.subjectThermal oxidationen
dc.subjectMicroscopia de força atômicapt_BR
dc.subjectSputtering depositionen
dc.subjectOxidaçãopt_BR
dc.subjectMOS structureen
dc.subjectIon beam analysesen
dc.subjectTratamento térmicopt_BR
dc.subjectEspectroscopia de fotoelétrons excitados por raios Xpt_BR
dc.subjectDeposição por sputteringpt_BR
dc.titleFilmes de SiO2 depositados e crescidos termicamente sobre SiC : caracterização físico-química e elétricapt_BR
dc.title.alternativeSiO2 films deposited and thermally grown on SiC: Electrical and physicochemical characterization en
dc.typeDissertaçãopt_BR
dc.identifier.nrb000883721pt_BR
dc.degree.grantorUniversidade Federal do Rio Grande do Sulpt_BR
dc.degree.departmentInstituto de Químicapt_BR
dc.degree.programPrograma de Pós-Graduação em Ciência dos Materiaispt_BR
dc.degree.localPorto Alegre, BR-RSpt_BR
dc.degree.date2013pt_BR
dc.degree.levelmestradopt_BR


Files in this item

Thumbnail
   

This item is licensed under a Creative Commons License

Show simple item record