Show simple item record

dc.contributor.advisorPacheco, Joyson Luizpt_BR
dc.contributor.authorPaese, Evandropt_BR
dc.date.accessioned2010-06-18T04:19:21Zpt_BR
dc.date.issued2010pt_BR
dc.identifier.urihttp://hdl.handle.net/10183/23932pt_BR
dc.description.abstractEsta dissertação apresenta modelagem matemática e um método de solução numérica para problemas de conformação eletromagnética de chapas metálicas finas circulares utilizando uma bobina em espiral plana. O método foca especificamente o cálculo do campo eletromagnético gerado pela bobina e análise do circuito que modela o sistema de estampagem eletromagnética. A bobina plana é aproximada por círculos concêntricos carregando a corrente de descarga dos capacitores. Os cálculos das correntes induzidas e perfil da força eletromagnética na chapa e acoplamentos magnéticos entre a bobina e chapa metálica são realizados para o instante inicial, antes da deformação plástica da chapa. O método utiliza a lei de Biot-Savart, sendo que a solução das integrais obtidas para indução magnética é realizada através de métodos numéricos, considerando as simetrias do problema. Para verificação da modelagem matemática, da solução numérica e comprovação da viabilidade técnica deste processo, um dispositivo de estampagem eletromagnética foi desenvolvido e diversos experimentos foram realizados com chapas de alumínio. Os parâmetros investigados foram a espessura da chapa a ser deformada e a influência da presença de vácuo na cavidade da ferramenta. Os resultados experimentais demonstram concordância com os resultados da modelagem proposta. A presença de vácuo também demonstrou um incremento na deformação da chapa. A rotina desenvolvida no software Matlab fornece informações importantes para o processo e permite que se faça ajustes no dispositivo.pt_BR
dc.description.abstractThis dissertation presents a mathematical model and numerical method to solve the problems of electromagnetic forming of thin circular metal sheets by using a flat spiral coil. The method focuses specifically on the calculation of the electromagnetic field generated by the coil flat and circuit analysis modeling system electromagnetic forming. The flat coil is approximated by concentric circles carrying a discharge current of capacitors. The calculations of induced currents and profile of the electromagnetic force on the plate and magnetic coupling between the coil and sheet metal are made to the initial time, before the plastic deformation of the plate. The method uses the law of Biot-Savart, and the solution of the integral obtained for magnetic induction is performed by numerical methods, considering the symmetries of the problem. To verify the mathematical model, the numerical solution and proving the technical feasibility of this process, a electromagnetic forming device was developed and several experiments were made with aluminum plates. The parameters investigated were the thickness of the plate to be deformed and the influence of the vacuum in the cavity of the tool. The experimental results show agreement with the results of the proposed model. The presence of vacuum also showed an increase in the deformation of the plate. A routine developed in software Matlab provide important information for the process and allow to make adjustments on the device.en
dc.format.mimetypeapplication/pdf
dc.language.isoporpt_BR
dc.rightsOpen Accessen
dc.subjectEstampagempt_BR
dc.subjectElectromagnetic (EMG) formingen
dc.subjectConformação eletromagnéticapt_BR
dc.subjectFlat spiral coil design in electromagnetic formingen
dc.subjectModelos matemáticospt_BR
dc.subjectBiot-Savart lawen
dc.subjectMagnetic inductionen
dc.subjectMathematical modeling of electromagnetic forming problemsen
dc.titleEstampagem eletromagnética de chapas finas : viabilidade técnicapt_BR
dc.title.alternativeElectromagnetic forming of thin metal sheets: technical feasibility en
dc.typeDissertaçãopt_BR
dc.contributor.advisor-coHomrich, Roberto Petrypt_BR
dc.identifier.nrb000741402pt_BR
dc.degree.grantorUniversidade Federal do Rio Grande do Sulpt_BR
dc.degree.departmentEscola de Engenhariapt_BR
dc.degree.programPrograma de Pós-Graduação em Engenharia Mecânicapt_BR
dc.degree.localPorto Alegre, BR-RSpt_BR
dc.degree.date2010pt_BR
dc.degree.levelmestradopt_BR


Files in this item

Thumbnail
   

This item is licensed under a Creative Commons License

Show simple item record