Listar Ingeniería por tema "Nanocompósitos"
Mostrando ítems 1-10 de 10
-
Application of polymeric nanocomposites and carbon fiber composites in the production of natural gas reservoirs
(2015) [Artículo de periódico]This research work is about the experimental analysis of the mechanical behavior of reservoirs for storage of compressed natural gas (CNG) consisting of a nanopolymeric liner coated with carbon fiber preimpregnated with ... -
Effect of carbon nanotubes addition on the mechanical and thermal properties of epoxy matrices
(2008) [Artículo de periódico]In this work, nanocomposites were prepared by adding a small amount of single walled carbon nanotubes (SWCNTs) to an epoxy resin aiming to study the resulting mechanical, viscoelastic and thermal properties of the ... -
Glass fiber hybrid composites molded by RTM using a dispersion of carbon nanotubes/clay in epoxy
(2013) [Artículo de periódico]Nanocomposites based on epoxy and a mixture of clays and multi-walled carbon nanotubes (MWCNT) were produced by casting, and also molded by RTM using glass fibers as reinforcement, yielding a hybrid multi-scale micro/nanocomposite ... -
Influence of the addition of montmorillonite in an epoxy powder coating applied on carbon steel
(2015) [Artículo de periódico]Polymer coatings have been used for the corrosion protection of metal surfaces acting as a physical barrier against several corroding media. In spite of the good efficiency of these coatings their resistance is limited due ... -
Nanocomposite of photocurable epoxy-acrylate resin and carbon nanotubes : dynamic-mechanical, thermal and tribological properties
(2012) [Artículo de periódico]In this study, the thermal, dynamic-mechanical and tribological behavior of nanocomposites of a photocurable epoxy-acrylate resin and multiwalled carbon nanotubes (MWCNT) are investigated. A route consisting of a combination ... -
Preparation and performance of TiO2-ZnO/CNT hetero-nanostructures applied to photodegradation of organic dye
(2016) [Artículo de periódico]Water pollution by organic compounds is one of the major challenges faced by industries that use dyeing processes. Thus, some methods were developed for degrading dyes in wastewaters, including heterogeneous photocatalysis ... -
Study of epoxy/CNT nanocomposites prepared via dispersion in the hardener
(2011) [Artículo de periódico]In this study, carboxylated (SWCNT-c) and pristine (SWCNT) single-walled carbon nanotubes were randomly dispersed in a hardener prior to mixing it with an epoxy resin. The influence of several parameters on the dispersion ... -
Synthesis, characterization and application by HVOF of a WCCoCr/NiCr nanocomposite as protective coating against erosive wear
(2018) [Artículo de periódico]The scope of this work is to synthetize and characterize a WCCoCr/NiCr nanocomposite evaluating its application as protective coating against erosive wear when applied by High Velocity Oxygen Fuel (HVOF). The composite was ... -
Synthesis of WC-12wt%Co nanocomposites by high energy ball milling and their morphological characterization
(2015) [Artículo de periódico]In this work micrometric particles of WC and Co were processed by high energy ball milling in a planetary ball mill. We evaluated the phase formation and changes in microstructure of WC-12wt%Co as a result of the following ... -
Zinc layered hydroxide salts : intercalation and incorporation into low-density polyethylene
(2014) [Artículo de periódico]In this study, polymer composites using low-density polyethylene (LDPE) and layered hydroxide salts (LHS) were synthesized. The following compositions of LHS were obtained Zn5(OH)8(An-)2/n.yH2O, where A was varied in order ...