Influência de diferentes espessuras no grau de conversão de uma resina adesiva
View/ Open
Date
2013Author
Type
Title alternative
Influence of different thickness in the degree of conversion of an adhesive resin
Subject
Abstract in Portuguese (Brasil)
Objetivo: o objetivo desse trabalho foi avaliar o grau de conversão (GC) de diferentes espessuras (1; 2; 3 e 4 mm) de uma resina adesiva translúcida de uso odontológico. Materiais e métodos: o GC de uma resina adesiva translúcida foi avaliado por meio de espectroscopia no infravermelho por transformada de Fourier (FTIR) acoplado a um dispositivo de refletância total atenuada (ATR). Foram utilizadas quatro matrizes de polivinilsiloxano de 1; 2; 3 ou 4 mm de espessura por 7 mm de diâmetro cada um ...
Objetivo: o objetivo desse trabalho foi avaliar o grau de conversão (GC) de diferentes espessuras (1; 2; 3 e 4 mm) de uma resina adesiva translúcida de uso odontológico. Materiais e métodos: o GC de uma resina adesiva translúcida foi avaliado por meio de espectroscopia no infravermelho por transformada de Fourier (FTIR) acoplado a um dispositivo de refletância total atenuada (ATR). Foram utilizadas quatro matrizes de polivinilsiloxano de 1; 2; 3 ou 4 mm de espessura por 7 mm de diâmetro cada uma para conter o adesivo dispensado (n = 3) sobre o cristal de diamante do dispositivo de ATR. ANOVA de uma via e teste de comparações múltiplas de Student- Newman-Keuls foram utilizados com um nível de significância estatística de 5%. Resultados: espécimes de 1 mm de espessura apresentaram estatisticamente maiores valores de GC (62,19± 0,20) comparado aos demais grupos (p<0,05). Os grupos de 2 e 3 mm não apresentaram diferença entre si (p>0,05), mas foram maiores que o grupo de 4mm (p>0,05). Conclusão: : é necessária a padronização da espessura dos espécimes submetidos ao ensaio de avaliação de GC por FTIR-ATR. ...
Abstract
Aim: the purpose of this study was to evaluate the degree of conversion (DC) of different thicknesses (1, 2, 3 and 4 mm) of a translucent dental adhesive resin Materials and Methods: the degree of conversion (DC) of adhesive resins was measured by Fourier Transform Infrared Spectroscopy (FTIR) equipped with an attenuated total reflectance device (ATR). It were used four matrices of polyvinylsiloxane with dimensions of 1; 2; 3 or 4 mm in thickness and 7 mm in diameter each one to contain the dis ...
Aim: the purpose of this study was to evaluate the degree of conversion (DC) of different thicknesses (1, 2, 3 and 4 mm) of a translucent dental adhesive resin Materials and Methods: the degree of conversion (DC) of adhesive resins was measured by Fourier Transform Infrared Spectroscopy (FTIR) equipped with an attenuated total reflectance device (ATR). It were used four matrices of polyvinylsiloxane with dimensions of 1; 2; 3 or 4 mm in thickness and 7 mm in diameter each one to contain the dispensed adhesive (n = 3) on the diamond crystal of the ATR device. The data were analyzed by one-way ANOVA and Student-Newman-Keels’ post hoc test (α=0.05). Results: specimens of 1 mm of thickness showed statistically higher DC (62.19 ± 0.20) compared to the other groups (p<0.05). The DC of specimens of 2 mm did not differ from specimens of 3 mm in thickness (p>0.05), but groups of 2 and 3 mm showed higher DC than the group of 4 mm (p<0.05). Conclusion: the standardization of the thickness of the specimens for DC assay using FTIR-ATR is necessary. ...
In
Revista da Faculdade de Odontologia de Porto Alegre. Porto Alegre. Vol. 54, n. 1-3 (jan./dez. 2013), p. 11-13
Source
National
Collections
-
Journal Articles (40021)Health Sciences (10691)
This item is licensed under a Creative Commons License