Mostrar registro simples

dc.contributor.advisorAraujo, Marco Aurelio dept_BR
dc.contributor.authorOjeda, Telmo Francisco Manfronpt_BR
dc.date.accessioned2007-06-06T17:10:32Zpt_BR
dc.date.issued1984pt_BR
dc.identifier.urihttp://hdl.handle.net/10183/1355pt_BR
dc.description.abstractAmostras de borracha natural foram reticuladas por meio de radiação gama (doses de 2, 4, 6 e 8 MRad) e intumescidas: a) em n-octano, ciclo-hexano e esqualeno; b) em polibutadieno líquido (Mn=1830 g/mol; alto teor 1,4- cis) a 45°C; C) em solução de polibutadieno de baixo peso molecular (M,= 1830 g/mol; alto teor 1,4-cis) em n-octano e ciclo-hexano; d) em solução de polibutadieno de alto peso molecular (Mn= 175.000 g/rnol; alto teor 1,4-cis) emn-octano e ciclo-hexano ; e) em solução de borracha natural (Mn=779.000 g/mol) em ciclo- hexano, a 25°C. Amostras de polibutadieno (alto teor 1,4-cis) foram reticuladas por meio de radiação gama (doses de 1,s; 18 e 25 MRad) e intumescidas: a) em n-octano, ciclo-hexano e esquaieno. Salvo quando mencionado em contrário, as amostras de borracha natural e de polibutadieno foram intumescidas nas temperaturas de 25, 35 e 45°C. A partir dos ensaios de intumescirnento acima mencionados, foram determinadas as solubilidades de borracha natural e de polibutadieno em n-octano, ciclo-hexano e esqualeno através dos parâmetros de Flory-Huggins, calculados com o emprego da equação de Flory-Rehner. Verificou-se a influência da temperatura e da concentração de polimero no gel sobre o valor do parâmetro de Flory-Huggins. Também através desse parâmetro procurou-se determinar a compatibilidade entre borracha natural e polibutadieno. Foi demonstrado que cadeias lineares de baixo peso molecular de polibutadieno conseguem penetrar em amostras reticuladas de borracha natural, quando o peso molecular das cadeias lineares for bem inferior ao do arco de rede Mc das amostras reticuladas. Cadeias lineares de polibutadieno e de borracha natural com peso molecular superior ao do arco de rede da borracha natural reticulada, entretanto, não conseguem penetrar no retículo. Quranto mais alta a concentração da solução externa em moléculas de alto peso molecular, tanto menor é o grau de intumescimento da amostra reticulada.pt_BR
dc.description.abstractSamples of natural rubber were crosslinked by gamma radiation (2,4,6 and 8 MRad doses) and swollen: a) in n-octane, cyclohexane and squalen; b) in liquid polybutadiene (h = 1830 g/mol; high cis-1,4- content) by 45°C; c) in solution of low molecular weight polybutadiene (%= 1830 g/mol; high eis-1,4-content) in n-octane and cyclohexane; d) in solution of high molecular weight polybutadiene (h = 175.000 g/mol; high cis-1,4-content) in n-octane and cyclohexane; e ) in solution of natural rubber (Mn = 779.000 g/mol) in cyclohexane by 25QC. Samples of polybutadiene (high cis- 1 ,4-content) were crosslinked by gama radiation (1 "5; i 8 and 25 MRad doses) and swollen : a) i n n-octane, cyclohexane and squalen. Except weather mentioned otherwise, the samples of natural rubber and polybutadiene were swollen by 25, 35 and 45°C. From the swelling rneasurements over refered, the solubilities of natural rubber and polybutadiene in n-octane,cyclohexane and squalen were determined, through the Flory-Huggins parameters. These were calculated by the agplication oF the Flory-Rehner equation. The influentes of temperature and polymer concentration on the Flowy- Huggins parameter were investigated. The compatibility between natural rubber and polybutadiene was also investigated by means of the: Flory-Huqgins parameter. It was demonstrated that linear low molecular weight chains of polybutadiene can penetrate crosslinked samples of natural rubber, weather the molecular weight of the linear chains is much lower than the,network parameters Mc of the networks. Linear high molecular weight chains of polybutadiene and natural rubber, on the contrary, can not penetrate crosslinked samples of natural rubber, weather their molecular weight is higher than Mc of the networks. The higher the concentration of the solution outside the gel in high molecuiar weight chains, the lower was the degree of swelling of the crosslinked samples .en
dc.description.abstractNaturkautschukproben wurden durch Gammastrahlung vernetzt (2,4,6 und 8 MRad Dosis). Dann wurden sie unter folgenden Bedingungen gequollen: a) in n-Octan, Cyclohexan und Squalen; b) in flüssigem Polybutadien (k = 1830 g/Mol; hoher cis- 1,4-Gehalt), bei 45°C; c) in Niedrigrmolekulargewichtpolybutadienlösungen (Mn = 1830 g/Mol; hoher cis-1,4-Gehalt) in n-Octan und Cyclohexan; d) in Hochmolekulargewichtpolybutadienlösungen (Mn= 1 75.000 g/Mol; hoher cis-l ,4-Gehalt) in n-Qctan und Cyclohexan; e) in Naturkautschuklösungen (h = 779.000 g/Mol) in Cyclohexan bei 25°C. Polybutadienproben wurden durch Gammastrahlung vemetzt (1, 5; 18 cnd 25 MRad Dosis) und unter folgenden Bendingungen gequollen: a) in n-Octan, Cyclohexan und Squalen. Falls nicht anders erwähnt,wurden die Proben bei 25, 35 und 45°C gequollen. AUS der Quellungsmessungen wurden die Wechselwirkungsparameter zwischen (vernetzten) Polymeren und Lösungsmitteln (oder flüssigem Polyrmeren das als Lösungsmittel fungiert) berechnet. Dazu wurde die Flory-Rehner'sche Gleichung verwendet. Der Einfluss von Temperatur und Polymerkonzentration im Gel auf den Flory-Huggins Parameter wurde untersucht. Die Verträglichkeit zwischen Naturkautschuk und polybutadien wurde auch durch den Wechselwirkungsparameter untersucht. Es wurde gezeigt, dass lineare Niedrigmolekulargewichtpolybutadienketten in die vernetzte Naturkautschukproben eindringen können, wenn das Molekulargewicht der linearen Ketten sehr niedriger als den Netzwerksparameter Mc des Netzwerks ist. Lineare Hochmolekulargewicht- Polybutadienketten und-Naturkautschukketten, im Gegenteil, können nicht in die vernetzte Naturkautschukproben eindringen, wenn ihr Molekulargewicht höher als Mc des Netzwerks ist. Je höher die Konzentration der äusseren Lösungen im linearen Naturkautschuk (hohes Molekulargewicht), desto geringer die Quellung der Naturkautschukproben gewesen ist.de
dc.format.mimetypeapplication/pdf
dc.language.isoporpt_BR
dc.rightsOpen Accessen
dc.subjectTecnologia da borrachapt_BR
dc.subjectPolibutadienopt_BR
dc.subjectTecnologia de polímerospt_BR
dc.titleComparação entre os intumescimentos de borracha natural e polibutadieno com alto teor 1,4-cis em solventes (n-octano, ciclo-hexano e esqualeno) e em soluções poliméricaspt_BR
dc.title.alternativeComparison between the swellings of natural rubber and polybutadiene with higb CIS-1, 4-content in solvents (n-octane, cyclohexane and squalen) and in polymer solutions en
dc.title.alternativeVergleich zwischen den quellungen von naturkautschuk und polybutãdien mit hohem CIS-1, 4-gehalt in lösungsmitteln (n-octan, cyclohexan und squalen) und in polymerlösungen de
dc.typeDissertaçãopt_BR
dc.identifier.nrb000011908pt_BR
dc.degree.grantorUniversidade Federal do Rio Grande do Sulpt_BR
dc.degree.departmentEscola de Engenhariapt_BR
dc.degree.programPrograma de Pós-Graduação em Engenharia de Energia, Metalurgia e dos Materiaispt_BR
dc.degree.localPorto Alegre, BR-RSpt_BR
dc.degree.date1984pt_BR
dc.degree.levelmestradopt_BR


Thumbnail
   

Este item está licenciado na Creative Commons License

Mostrar registro simples